Loading...
 
 Warning
  • User not in any of the required groups for GroupSelector field

Data Form

  • Tracker actions

Items 226

Record # Select Document Category Anticipated publication year Publication year Source (e.g. developer/organization) Acronym (e.g. ISO, IEC) Identifier (e.g. document designation number) Title of document URL Link Scope/description Keywords Type of Document Issue area(s) this applies to Primary category that this applies to Any additional categories this applies to Goal or need for this document Intended stakeholders Is it being implemented on a national or subnational level? If so, how and why? How is this document being used on the market? Submitter's name Email address Submitter's company/organization Additional comments Contact for additional comments and inquiries (This field is for ANSI use only) login group Last modified
24 Published Document 2012 U.S. National Institute for Occupational Safety and Health NIOSH DHHS (NIOSH) 2012-147 General Safe Practices for Working with Engineered Nanomaterials in Research Laboratories http://www.cdc.gov/niosh/docs/2012-147/ This document contains recommendations on engineering controls and safe practices for handling... nanomaterials, laboratory, occupational safety c. Guideline Health, Safety, and Environment research laboratories As with any new technology or new material, the earliest exposures will likely occur for those... research community Vladimir Murashov [email protected] NIOSH EF hbenko Editors 2014-02-28
25 Published Document 2012 International Electrotechnical Commisssion IEC 62607-2-1 Nanomanufacturing - Key control characteristics - Part 2-1: Carbon nanotube materials - Film resistance http://webstore.iec.ch/webstore/webstore.nsf/artnum/046421!opendocument Provides a standardized method for categorizing a grade of commercial carbon nanotubes in terms... film resistance, key control characteristics, nanotube, carbon nanotubes e. Specification Measurement and Characterizations
Performance Methods 		Energy e.g. Energy storage, energy efficiency Computers and electronics The correlation between the measured parameters from this method and a relevant product... Carbon nanotube suppliers; Producers of nano-electrotechnical enabled products or systems, e.g.... This international technical specification can be adopted at a national level if desired. Not yet determined Mike Leibowitz [email protected] NEMA EF hbenko Editors 2014-02-28
27 Published Document 2012 Organization of Economic Cooperation & Development - Working Party on Manufactured Nanomaterials OECD-WPMN ENV/JM/MONO(2012)8 Important Issues on Risk Assessment of Manufactured Nanomaterials http://www.oecd.org/officialdocuments/displaydocumentpdf/?cote=env/jm/mono(2012)8&doclanguage=en This document, Important Issues on Risk Assessment of Manufactured Nanomaterials, provides the... OECD, WPMN, regulatory, risk assessment c. Guideline Health, Safety, and Environment Chemicals e.g. pesticides, pharmaceuticals, paints, basic chemicals General Industry/Manufacturing; Food e.g. Preserving/Specialty food manufacturing; Personal care Important Issues on Risk Assessment of Manufactured Nanomaterials, provides the current... Risk assessors and risk managers are a primary audience. There may be general interest in the... Guidance for risk assessment. Shaun Clancy [email protected] Evonik EF hbenko Editors 2014-02-28
26 Published Document 2012 Organization of Economic Cooperation & Development - Working Party on Manufactured Nanomaterials OECD-WPMN ENV/JM/MONO(2012)40 Guidance on Sample Preparation and Dosimetry for the Safety Testing of Manufactured Nanomaterials http://www.oecd.org/officialdocuments/displaydocument/?cote=env/jm/mono(2012)40&doclanguage=en The unique properties of manufactured nanomaterials have raised the question as to whether the... OECD, WPMN, preparation, dosimetry, characterization, media, regulatory c. Guideline Measurement and Characterizations Chemicals e.g. pesticides, pharmaceuticals, paints, basic chemicals General Industry/Manufacturing; Food e.g. Preserving/Specialty food manufacturing; Personal care To help prepare nanomaterials for use in toxicological and ecotoxicological tests. The primary audience are those preparing and reviewing materials used in testing for regulatory... It may be used to guide the preparation of materials used in tests for regulatory purposes. Shaun Clancy [email protected] Evonik EF hbenko Editors 2014-02-28
29 Published Document 2012 International Organization for Standardization ISO ISO/TR 13014 Nanotechnologies — Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment http://webstore.ansi.org/RecordDetail.aspx?sku=ISO%2fTR+13014%3a2012 This Technical Report provides guidance for the physico-chemical characterization of manufactured... nano-objects, agglomerates, aggregates, parameters, toxicology, assessment a. Standard Health, Safety, and Environment Chemicals e.g. pesticides, pharmaceuticals, paints, basic chemicals General Industry/Manufacturing Physico-chemical characterization is critical for the precise identification of test materials... Toxicologists, regulators, health and safety professionals Heather Benko [email protected] ANSI EF hbenko Editors 2014-02-28
30 Published Document 2012 International Organization for Standardization ISO TR 13329 Nanomaterials — Preparation of Material Safety Data Sheet (MSDS) http://webstore.ansi.org/RecordDetail.aspx?sku=ISO%2fTR+13329%3a2012 This Technical Report provides guidance on the development of content for, and consistency in,... Manufactured nanomaterials, safety data sheet a. Standard Health, Safety, and Environment Chemicals e.g. pesticides, pharmaceuticals, paints, basic chemicals General Industry/Manufacturing Currently, there is limited information on the hazards of most nanomaterials. In many cases the... Heather Benko [email protected] ANSI EF hbenko Editors 2014-02-28
31 Published Document 2010 International Organization for Standardization ISO 29701 Nanotechnologies — Endotoxin test on nanomaterial samples for in vitro systems — Limulus amebocyte lysate (LAL) test http://webstore.ansi.org/RecordDetail.aspx?sku=ISO+29701%3a2010 This International Standard describes the application of a test using Limulus amebocyte lysate... a. Standard Health, Safety, and Environment General Industry/Manufacturing Chemicals e.g. pesticides, pharmaceuticals, paints, basic chemicals; Endotoxins can cause a variety of systemic reactions in mammals, including humans, such as fever,... Heather Benko [email protected] ANSI EF hbenko Editors 2014-02-28
32 Published Document 2013 U.S. National Institute for Occupational Safety and Health NIOSH DHHS (NIOSH) 2013-145 Current Intelligence Bulletin 65: Occupational Exposure to Carbon Nanotubes and Nanofibers http://www.cdc.gov/niosh/docs/2013-145/ This NIOSH Current Intelligence Bulletin, (1) reviews the animal and other toxicological data... carbon nanotubes, nanofibers, occupational safety c. Guideline Health, Safety, and Environment General Industry/Manufacturing The goal of this occupational safety and health guidance for carbon nanotubes (CNT) and carbon... Academia, industry, organized labor, public health agencies, and public interest groups, as well... Vladimir Murashov [email protected] NIOSH EF hbenko Editors 2014-02-28
33 Published Document 2011 International Organization for Standardization ISO 13121 Nanotechnologies - Nanomaterial risk evaluation http://webstore.ansi.org/RecordDetail.aspx?sku=ISO%2fTR+13121%3a2011 This Technical Report describes a process for identifying, evaluating, addressing, making... Nanomaterials, risk management a. Standard Health, Safety, and Environment Chemicals e.g. pesticides, pharmaceuticals, paints, basic chemicals General Industry/Manufacturing; Personal care products Organizations that manufacture or process nanomaterials, or manufacture, process or distribute... Heather Benko [email protected] ANSI EF hbenko Editors 2014-02-28
34 Published Document 2013 ASTM International Technical Committee on Nanotechnology ASTM E56 ASTM E2909 - 13 Standard Guide for Investigation/Study/Assay Tab-Delimited Format for Nanotechnologies (ISA-TAB-Nano): Standard File Format for the Submission and Exchange of Data on Nanomaterials and Characterizations http://www.astm.org/Standards/E2909.htm 1.1 This guide (ISA-TAB-Nano) specifies the format for representing and sharing information about... data sharing; ISA-TAB-Nano; nanomedicine; nanotech a. Standard Terminology and Nomenclature Nanomaterials Debra Kaiser [email protected] NIST Material Measurement Laboratory EF hbenko Editors 2014-02-28
36 Published Document 2012 International Organization for Standardization ISO 14101 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method http://webstore.ansi.org/RecordDetail.aspx?sku=ISO%2fTS+14101%3a2012 This Technical Specification provides guidelines for the identification of the surface bound... gold nanoparticles, cytotoxicity a. Standard Measurement and Characterizations
Health, Safety, and Environment 		Chemicals e.g. pesticides, pharmaceuticals, paints, basic chemicals Heather Benko [email protected] ANSI EF hbenko Editors 2014-02-28
37 Published Document 2013 Institute of Environmental Sciences and Technology IEST IEST-RP-NANO200 Planning of Nanoscale Science and Technology Facilities: Guidelines for Design, Construction, and Start-up http://www.iest.org/RecommendedPractices/IESTRDCC200/tabid/9673/Default.aspx This Recommended Practice is an overview of factors involved in the design, start-up, and... nanotechnology facilities, nano laboratories, nano research centers b. Best Practice Health, Safety, and Environment Nano Facility Design Facility owners, designers, construction team, users/researchers, and equipment providers Diana Granitto [email protected] IEST EF dgranitto Editors 2014-02-28
38 Published Document 2013 International Organization for Standardization ISO ISO/DIS 14644-12 Cleanrooms and associated controlled environments — Part 12: Classification of air cleanliness by nanoscale particle concentration http://www.iest.org/StandardsRPs/ISOStandards/ISOTC209WorkingGroup10Nanotechnology/tabid/10149/Default.aspx This Draft International Standard covers the classification of air cleanliness by particles (ACP)... nanoscale particles, nano cleanroom, ACP a. Standard Measurement and Characterizations
Performance Methods 		Energy e.g. Energy storage, energy efficiency Air cleanliness, contamination control, across industries; aerospace; General Industry/Manufacturing Those involved with compliance and testing of nanoscale particle cleanliness of air in a... Diana Granitto [email protected] IEST EF dgranitto Editors 2014-02-28
39 Published Document 2011 U.S. National Institute for Occupational Safety and Health NIOSH DHHS (NIOSH) Publication Number 2011-160 Current Intelligence Bulletin 63: Occupational Exposure to Titanium Dioxide http://www.cdc.gov/niosh/docs/2011-160/ This NIOSH CIB (1) reviews the animal and human data relevant to assessing the carcinogenicity... nanoscale titania, occupational safety and health c. Guideline Health, Safety, and Environment General Industry/Manufacturing The goal of this document is to conduct risk assessment for workplace inhalation exposure to... academia, industry, organized labor, public health agencies, and public interest groups as well... Vladimir Murashov [email protected] U.S. NIOSH EF vmurashov Editors 2014-02-28
42 Published Document 2008 ASTM International ASTM E2524 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles http://www.astm.org/Standards/E2524.htm This test method covers assessing the effect of nanoparticulate materials on the integrity of red... hemolysis; nanoparticulate; plasma; whole blood; a. Standard Performance Methods Kate McClung [email protected] ASTM International EF kmcclung Editors 2014-02-28
43 Published Document 2008 ASTM International ASTM E2525 Standard Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-Macrophage Colonies http://www.astm.org/Standards/E2525.htm Significance and Use Stem cells of hematopoietic origin are pluripotential and may be... bone marrow; CFU-GM; clonogenic assay; granulocyte; macrophage; myelosuppression; stem cells a. Standard Measurement and Characterizations Medical Kate McClung [email protected] ASTM International EF kmcclung Editors 2014-02-28
44 Published Document 2008 ASTM International ASTM E2526 Standard Test Method for Evaluation of Cytotoxicity of Nanoparticulate Materials in Porcine Kidney Cells and Human Hepatocarcinoma Cells http://www.astm.org/Standards/E2526.htm Assessing the propensity of a nanomaterial to cause cytotoxicity to the cells of a target organ... cytotoxicity; hepatocytes; kidney cells; nanoparticles; Cytotoxicity; Hepatocytes; Kidney cells; a. Standard Health, Safety, and Environment Chemicals e.g. pesticides, pharmaceuticals, paints, basic chemicals Medical; Personal care products Kate McClung [email protected] ASTM International EF kmcclung Editors 2014-02-28
45 Published Document 2007 ASTM International ASTM E2535 Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings http://www.astm.org/Standards/E2535.htm Significance and Use This Guide is intended for use by entities involved in the handling of UNP... a. Standard Health, Safety, and Environment Kate McClung [email protected] ASTM International EF kmcclung Editors 2014-02-28
48 Published Document 2011 ASTM International ASTM E2859 Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy http://www.astm.org/Standards/E2859.htm Significance and Use As AFM measurement technology has matured and proliferated, the technique... atomic force microscope; AFM; calibration; cantilever deflection; contact mode; functionalized substr a. Standard Measurement and Characterizations Kate McClung [email protected] ASTM International EF kmcclung Editors 2014-02-28
46 Published Document 2012 ASTM International ASTM E2578 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions http://www.astm.org/Standards/E2578.htm Significance and Use Mean particle diameters defined according to the Moment-Ratio (M-R) system... distribution; equivalent size; mass distribution; mean particle size; mean particle diameter; a. Standard Measurement and Characterizations Kate McClung [email protected] ASTM International EF kmcclung Editors 2014-02-28
40 Published Document 2012 ASTM International ASTM E2456 Standard Terminology Relating to Nanotechnology http://www.astm.org/Standards/E2456.htm Nanotechnology is an emerging field; this standard defines the novel terminology developed for... terminology c. Guideline Terminology and Nomenclature Kate McClung [email protected] ASTM International EF kmcclung Editors 2014-02-28
15 Published Document 2011 International Electrotechnical Commisssion IEC 62565-2-1 Nanomanufacturing - Material specifications - Part 2-1: Single-wall carbon nanotubes - Blank detail specification IEC/PAS 62565-2-1:2011(E) establishes a blank detail specification for the essential electrical... Carbon nanotubes, blank detail specification, single-wall, CNT, SWCNT e. Specification Measurement and Characterizations
Material Specifications
Performance Methods 		Energy e.g. Energy storage, energy efficiency The goal of this document is to facilitate a reliable source of carbon nanotubes with tailored... Suppliers and end users of carbon nanotubes intended for use in electrical and electronic... Not at this time. However this international document can be adopted at a national level if desired. The document is providing a standardized communication tool between CNT vendors and customers Mike Leibowitz [email protected] NEMA EF ying0922 Editors 2014-02-28
41 Published Document 2009 ASTM International ASTM E2490 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS) http://www.astm.org/Standards/E2490.htm This guide deals with the measurement of particle size distribution of suspended particles, which... DLS; dynamic light scattering; PCS; photon correlation spectroscopy; nano; QELS; quasi-elastic light c. Guideline Measurement and Characterizations PCS is one of the very few techniques that are able to deal with the measurement of particle size... Kate McClung [email protected] ASTM International EF kmcclung Editors 2014-02-28
52 Published Document 2013 CSA Group CSA CAN/CSA-ISO/TR 13121:13 Nanotechnologies - Nanomaterial risk evaluation http://shop.csa.ca/en/canada/occupational-health-and-safety-management/cancsa-isotr-1312113/invt/27035102013 This is the first edition of CAN/CSA-ISO/TR 13121, Nanotechnologies - Nanomaterial risk... nanotechnology, nanomaterials, risk, risk management c. Guideline Health, Safety, and Environment General Industry/Manufacturing This Technical Report suggests methods organizations can use to be transparent and accountable in... This is a national adoption (Canada) of an international standard from ISO. Brian Haydon [email protected] CSA Group EF bhaydon Editors 2014-02-28
51 Published Document 2012 CSA Group CSA Z12885 Nanotechnologies — Exposure control program for engineered nanomaterials in occupational settings http://shop.csa.ca/en/canada/nanotechnologies-relevant-ohs-practices/z12885-12/invt/27032772012/ This is the first edition of CSA Z12885, Nanotechnologies — Exposure control program for... nanotechnologies, nanomaterials, workplace safety, engineereed nanomaterials, exposure control, occu a. Standard Health, Safety, and Environment General Industry/Manufacturing The field of nanotechnologies is advancing rapidly and is expected to impact virtually every... This Standard focuses on the manufacture and use of engineered nanomaterials in workplaces... The... This is the first edition of CSA Z12885, Nanotechnologies — Exposure control program for engineered nanomaterials in occupational settings. It is based on ISO (International Organization for... This Standard specifies requirements for establishing and maintaining an exposure control program... Brian Haydon [email protected] CSA Group EF bhaydon Editors 2014-02-28
::::